Refer to the display multiplexer given below. The MSD display is blank, while the LSD seems to be OK. The input and output lines to the 74157 and 7449 are checked with a scope and can be seen changing levels. The A input on the 74139 also changes; howev

Refer to the display multiplexer given below. The MSD display is blank, while the LSD seems to be OK. The input and output lines to the 74157 and 7449 are checked with a scope and can be seen changing levels. The A input on the 74139 also changes; however, the 0 output on the 74139 is always LOW and the 1 output is always HIGH. The B and EN inputs on the 74139 are always LOW. What could cause the problem and what should be done to correct it?

mcq9_1015_1

[A].	The 74139 is defective; replace it.
[B].	The EN pin on the 74139 could have a bad connection; check the connection.
[C].	The 74139 is defective and must be replaced; or the EN pin on the 74139 could have a bad connection, which should be checked.
[D].	The MSD display is bad; replace it.

Answer: Option C

Explanation:

No answer description available for this question. Let us discuss.

Refer to the display multiplexer given below. The MSD display is blank, while the LSD seems to be OK. The input and output lines to the 74157 and 7449 are checked with a scope and can be seen changing levels. The A input on the 74139 also changes; howev

Electronics & Communication Engineering :: Digital Electronics Questions with Answers : More Exercises

Questions & Answers

Interviews

Jobs

Results

Admission

Admit Card

Answer Key