Refer to the figure given below. The logic function generator being implemented with the multiplexer in this circuit produces a constant LOW on the output. The ABC inputs are checked and appear to be pulsing; also, the 0–7 and EN inputs are checked wi

Refer to the figure given below. The logic function generator being implemented with the multiplexer in this circuit produces a constant LOW on the output. The ABC inputs are checked and appear to be pulsing; also, the 0–7 and EN inputs are checked with the scope and all appear to be at 0 V. A check with the DMM confirms that power is on. What is the problem, and what should be done to correct it?

mcq9_1020_1

[A].	The output is shorted to Vcc; replace the IC.
[B].	The scope's vertical input is in the AC mode and the common connection for the 0,2,3 and 5 inputs is bad. Set the scope's vertical input mode to DC, and repair the bad solder connection.
[C].	Power has not been applied to the circuit; apply power.
[D].	The output is shorted to ground; replace the IC.

Answer: Option B

Explanation:

No answer description available for this question. Let us discuss.

Refer to the figure given below. The logic function generator being implemented with the multiplexer in this circuit produces a constant LOW on the output. The ABC inputs are checked and appear to be pulsing; also, the 0–7 and EN inputs are checked wi

Electronics & Communication Engineering :: Digital Electronics Questions with Answers : More Exercises

Questions & Answers

Interviews

Jobs

Results

Admission

Admit Card

Answer Key