Time Response of Reactive Circuits - General Questions (3)

Directions to Solve

Time Response of Reactive Circuits - General Questions

17.

Referring to the give circuit, the output will

A.	decay to zero at the end of the pulse
B.	reach 6 V at the end of the pulse
C.	reach 3.78 V at the end of the pulse
D.	reach 5.16 V at the end of the pulse

Answer: Option A

Explanation:

No answer description available for this question.

18.

A steady-state condition is reached when

A.	the output voltage reaches the average value of the input voltage
B.	the output voltage reaches the input voltage
C.	the output voltage reaches approximately 63% of the input voltage
D.	the output voltage reaches the effective value of the input voltage

Answer: Option A

Explanation:

No answer description available for this question.

19.

Referring this circuit, determine the maximum output voltage when a single pulse is applied as shown. The total resistance is 60 .

A.	2.73 V
B.	27.33 V
C.	30 V
D.	2.67 V

Answer: Option B

Explanation:

No answer description available for this question.

20.

When a 12 V input pulse with a width equal to one time constant is applied to an RC integrator, the capacitor charges to

A.	0 V
B.	12 V
C.	6.3 V
D.	7.56 V

Answer: Option D

Explanation:

No answer description available for this question.

21.

With an RL integrator, at the instant of the rising pulse edge,

A.	all the input voltage is across the resistor
B.	all the input voltage is across the inductor
C.	63 percent of the input voltage is across the resistor
D.	63 percent of the input voltage is across the inductor

Answer: Option B

Explanation:

No answer description available for this question.

22.

Referring to Problem 5, how long will it take the capacitor to discharge if the internal resistance of the pulse source is 100 ?

A.	300 μs
B.	600 μs
C.	900 μs
D.	1.5 ms

Answer: Option D

Explanation:

No answer description available for this question.

23.

An integrator consists of a 3.3 k resistor and a 2 F capacitor. A single 30 V, 6 ms pulse is applied to the input. How much will the capacitor charge?

A.	10.3 V
B.	30 V
C.	12.09 V
D.	17.91 V

Answer: Option D

Explanation:

No answer description available for this question.

24.

When a 15 V input pulse with a width equal to two time constants is applied to an RC integrator, the capacitor charges to

A.	15 V
B.	12.9 V
C.	8.6 V
D.	19.45 V

Answer: Option B

Explanation:

No answer description available for this question.

Time Response of Reactive Circuits - General Questions (3)

Time Response of Reactive Circuits - General Questions

Questions & Answers

Interviews

Jobs

Results

Admission

Admit Card

Answer Key