RLC Circuits and Resonance - General Questions

A certain series RLC circuit with a 200 Hz, 15 V ac source has the following values: R = 12 , C = 80 F, and L = 10 mH. The total impedance, expressed in polar form, is

A 15  resistor, an inductor with 8  inductive reactance, and a capacitor with 12  capacitive reactance are in parallel across an ac voltage source. The circuit impedance is

A 9 mH coil is in parallel with a 0.015 F capacitor across an 18 kHz ac source. The coil's internal resistance, R_W, is 60 . The circuit impedance is

A certain series resonant circuit has a bandwidth of 2 kHz. If the existing coil is replaced with one having a higher value of Q, the bandwidth will

In a certain series resonant circuit, V_C = 125 V, V_L = 125 V, and V_R = 40 V. The value of the source voltage is

To tune a parallel resonant circuit to a higher frequency, the capacitance should be

A 24  resistor, an inductor with a reactance of 120 , and a capacitor with a reactance of 120  are in series across a 60 V source. The circuit is at resonance. The voltage across the inductor is

If the value of C in a series RLC circuit is decreased, the resonant frequency